Difference between revisions of "MGH head 1:MGH head 1"

From Martinos Center Anthropomorphic Phantoms
Jump to navigation Jump to search
 
(16 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
[[File:giorgio_phant.jpg|200px|thumb|right|]]
 +
=== Citation ===
 +
Nadine N. Graedel, Jonathan R. Polimeni, Bastien Guerin, Borjan Gagoski and Lawrence L. Wald (2015). "An anatomically realistic temperature phantom for radiofrequency heating measurements". Magnetic Resonance in Medicine 73(1):442–450
  
−
== MGH head 1 ==
+
=== Download files ===
 +
Click [https://phantoms.martinos.org/images/3/36/MGH_head_1.zip here] to download the CAD model.
  
−
This is a head phantom based on a 1mm isotropic resolution MR dataset which was anatomically segmented and used as a numerical model for electromagnetics calculations as described in:
+
=== Phantom description ===
−
Angeleno et al.
+
This phantom is based on a 1mm isotropic segmented head model which was labeled as described in [http://www.ncbi.nlm.nih.gov/pubmed/18985401 Makris et al].
  
−
* subsection ?
+
The segmented head data was converted into a simplified surface model with two compartments: Brain and other soft tissues. Bone and air (both low epsilon, low conductivity) are printed together out of plastic material with similar electrical properties.
  
−
[https://gate.nmr.mgh.harvard.edu/wiki/Phantoms/images/MGH_head_1.zip Click here for .skp and stl files] to download files for the anthropomorthic head phantom published in Graedel et al MRM 2014.
+
=== Special considerations ===
 +
The sealing flange uses an o-ring.
  
−
'''junk bold'''
+
[[File:Phantom_figure_CT_MR.png|400px|thumb|right|]]
−
 
 
−
junk
 

Latest revision as of 14:44, 24 March 2015

Giorgio phant.jpg

Citation

Nadine N. Graedel, Jonathan R. Polimeni, Bastien Guerin, Borjan Gagoski and Lawrence L. Wald (2015). "An anatomically realistic temperature phantom for radiofrequency heating measurements". Magnetic Resonance in Medicine 73(1):442–450

Download files

Click here to download the CAD model.

Phantom description

This phantom is based on a 1mm isotropic segmented head model which was labeled as described in Makris et al.

The segmented head data was converted into a simplified surface model with two compartments: Brain and other soft tissues. Bone and air (both low epsilon, low conductivity) are printed together out of plastic material with similar electrical properties.

Special considerations

The sealing flange uses an o-ring.

Phantom figure CT MR.png
Retrieved from "https://phantoms.martinos.org/index.php?title=MGH_head_1:MGH_head_1&oldid=155"